To Open the Door Manually
The door should be fully closed if
possible. Pull down on the emergency
release handle and lift the door
manually. To reconnect the door to the
opener, press the door control button.
The
lockout feature
prevents the trolley
from reconnecting automatically, Pull
the emergency release handle down
and back (toward the opener). The
door can then be raised and lowered
manually as often as necessary. To
disengage the lockout feature, pull the
handle straight down. The trolley will
reconnect on the next UP or DOWN
operation.
To prevent possible SERIOUS INJURY or DEATH from a falling
garage door:
• If possible, use emergency release handle to disengage
trolley ONLY when garage door is CLOSED. Weak or broken
springs or unbalanced door could result in an open door
falling rapidly and/or unexpectedly.
• NEVER use emergency release handle unless garage doorway
is clear of persons and obstructions.
• NEVER use handle to pull door open or closed. If rope knot
becomes untied, you could fall.
33
Using the Wall-Mounted Door Control
THE LIGHTED DOOR CONTROL BUTTON
(MODEL 1215EM)
Press the button to open or close the door. Press
again to reverse the door during the closing cycle or
to stop the door while it's opening.
THE MULTI-FUNCTION DOOR CONTROL
(MODEL 1225EM)
Press the push bar to open or close the door.
Press again to reverse the door during the
closing cycle or to stop the door while it's
opening.
Light feature
Press the Light button to turn the opener light
on or off. It will not control the opener lights when the door is in
motion. If you turn it on and then activate the opener, the light will
remain on for 4-1/2 minutes. Press again to turn it off sooner.
Lock feature
Designed to prevent operation of the door from hand-held remote
controls. However, the door will open and close from the Door
Control, the Outside Keylock and the Keyless Entry Accessories.
To activate, press and hold the Lock button for 2 seconds. The
push bar light will flash as long as the Lock feature is on.
To turn off, press and hold the Lock button again for 2 seconds.
The push bar light will stop flashing. The Lock feature will also
turn off whenever the “Learn” button on the motor unit panel is
activated.
LOCK
LIGHT
Push
Bar
Lock
Button
Light
Button
Trolley
Release
Arm
NOTICE
Emergency
Release
Handle
(Pull Down)
Trolley
Release
Arm
NOTICE
Emergency
Release Handle
(Pull Down & Back
Towards Opener)
MANUAL DISCONNECT POSITION
LOCKOUT POSITION
