background image

© 200

2

, The Chamberlain Group, Inc.

114A2466

E                                                                   

All Rights Reserved

Printed in Mexico

CHAMBERLAIN SERVICE

IS ON CALL

OUR LARGE SERVICE ORGANIZATION

SPANS AMERICA

INSTALLATION AND SERVICE INFORMATION IS AS
NEAR AS YOUR TELEPHONE SIX DAYS A WEEK.
SIMPLY DIAL OUR TOLL FREE NUMBER:

1-800-528-9131

HOURS: (Central Standard Time)

6:00 A.M. TO 7:00 P.M. Monday through Friday

8:00 A.M. TO 6:00 P.M. Saturday

www.chamberlaingroup.com

For professional installation, parts and service,

contact your local CHAMBERLAIN dealer. Look for him
in the Yellow Pages, or call our Service number for a list
of dealers in your area.

HOW TO ORDER

REPAIR PARTS

Selling prices will be furnished on request or parts will
be shipped at prevailing prices and you will be billed
accordingly.

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE
THE FOLLOWING INFORMATION:

• PART NUMBER

• PART NAME

• MODEL NUMBER

ADDRESS ORDERS TO:

THE CHAMBERLAIN GROUP, INC.

Technical Support Group

6020 S. Country Club Road

Tucson, Arizona 85706

SERVICE INFORMATION TOLL FREE NUMBER:

1-800-528-9131

CHAMBERLAIN GARAGE DOOR OPENER ONE-YEAR LIMITED WARRANTY

The Chamberlain Group, Inc. (“Seller”) warrants to the first retail purchaser of this product, for the residence in which this product is
originally  installed,  that  it  will  be  free  from  any  defect  in  materials  and/or  workmanship  for  a  period  of  one  year  from  the  date  of
purchase. Additionally, the motor is warranted for the lifetime of the product. The product must be used in complete accordance with
Chamberlain’s  instructions  for  installation,  operation,  and  care.

The  proper  operation  of  this  product  is  dependent  on  your

compliance  with  the  Owner’s  Manual  instructions  regarding  installation, operation, maintenance  and  testing. Failure  to
comply strictly with those instructions will void this warranty in its entirety. Please note that the safety reverse system, in order
to operate properly with your garage door, must be adjusted and periodically tested in accordance with the Owner’s Manual.

If, during the limited warranty period, it appears as though this product contains a defect which is covered by this limited warranty, 

call our

toll free service number, before dismantling this product, at 1-800-528-9131.

Then send this product, pre-paid and insured, to our

service center for warranty repair. You will be advised of shipping instructions when you call the toll free service number. Please include a
brief description of the problem and a dated proof-of-purchase receipt with any product that is returned for warranty repair.

Products returned to Seller for warranty repair, which upon receipt by Seller are confirmed to be defective and covered by this limited
warranty, will be repaired or replaced (at Seller’s sole option) at no cost to you and returned pre-paid. Defective parts will be repaired
or replaced with new or factory-rebuilt parts at Seller’s sole option.

THIS  LIMITED  WARRANTY  IS  IN  LIEU  OF  ANY  OTHER  WARRANTIES, EXPRESS  OR  IMPLIED, INCLUDING  ANY  IMPLIED
WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE, OR  OTHERWISE, AND  OF  ANY  OTHER
OBLIGATIONS  OR  LIABILITY  ON  SELLER’S  PART. THIS  LIMITED WARRANTY  DOES  NOT  COVER  NON-DEFECT  DAMAGE,
DAMAGE  CAUSED  BY  IMPROPER  INSTALLATION, OPERATION  OR  CARE  (INCLUDING, BUT  NOT  LIMITED  TO  ABUSE,
MISUSE, FAILURE  TO  PROVIDE  REASONABLE  AND  NECESSARY  MAINTENANCE, OR  ANY  ALTERATIONS  TO  THIS
PRODUCT), LABOR CHARGES FOR DISMANTLING OR REINSTALLING A REPAIRED OR REPLACED UNIT, REPLACEMENT OF
BATTERIES AND LIGHT BULBS, OR UNITS INSTALLED FOR NON-RESIDENTIAL USE.

THIS LIMITED WARRANTY DOES NOT COVER ANY PROBLEMS WITH, OR RELATING TO, THE GARAGE DOOR OR GARAGE
DOOR  HARDWARE, INCLUDING  BUT  NOT  LIMITED TO THE  DOOR  SPRINGS, DOOR  ROLLERS, DOOR  ALIGNMENT  AND
HINGES. ANY  SERVICE  CALL THAT  DETERMINES THE  PROBLEM  HAS  BEEN  CAUSED  BY  ANY  OF THESE  ITEMS  COULD
RESULT IN A FEE TO YOU.

UNDER  NO  CIRCUMSTANCES  SHALL  SELLER  BE  LIABLE  FOR  CONSEQUENTIAL, INCIDENTAL  OR  SPECIAL  DAMAGES
ARISING  IN  CONNECTION  WITH  THE  USE  OF, OR  INABILITY  TO  USE, THIS  PRODUCT. IN  NO  EVENT  SHALL  SELLER’S
LIABILITY FOR BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE OR STRICT LIABILITY EXCEED THE COST
OF  THE  PRODUCT  COVERED  HEREBY. NO  PERSON  IS  AUTHORIZED  TO  ASSUME  FOR  US  ANY  OTHER  LIABILITY  IN
CONNECTION WITH THE SALE OF THIS PRODUCT.

Some states do not allow the exclusion or limitation of consequential, incidental or special damages, so the above limitation or exclusion
may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.

LIMITED WARRANTY ON MOTOR

Models  PD420  and  PD420-2:

The  motor  is  warranted  to  be  free  from  any  defect  in  materials  and/or  workmanship  for  a  period  of 

72 full months (6 years) from the date of purchase.

Model PD460-2:

The motor is fully warranted for the lifetime of the product to the first-time purchaser.

Summary of Contents for POWER DRIVE PD420









































Reviews: