4
PROGRAM THE WI-FI HUB TO THE GARAGE DOOR OPENER
1. While the blue LED on the Wi-Fi hub is blinking, press and release the
BUTTON
(Settings), the Blue LED will turn on.
2. Press and hold the
BUTTON on the Wi-Fi hub until the green and yellow LEDs
alternate blinking.
3. While the green and yellow LEDs alternate blinking on the Wi-Fi hub, press and release
the
BUTTON on the Wi-Fi hub. The yellow LED on the Wi-Fi hub will turn on.
4. Press BUTTON 1 on the Wi-Fi hub the number of times indicated in the chart below:
NUMBER OF PRESSES
RF (IN MHZ)
BRAND
1
310, 315, and 390
LiftMaster
®
with Yellow LEARN button
2
315
LiftMaster
®
with Purple LEARN button
3
390
LiftMaster
®
with Orange LEARN button
4
390
LiftMaster
®
with Green LEARN button
5
315
Genie
®
/Overhead Door
®
Intellicode
6
390
Genie
®
/Overhead Door
®
Intellicode
7
318
Linear
®
Mega Code
8
310
Stanley
®
Secure Code
9
372.5
Wayne Dalton
®
Keeloq
5. Press the
BUTTON on the Wi-Fi hub.
6. Press and release the LEARN button on the garage door opener.
NOTE:
Visit www.myliftmaster.com for Genie Intellicode II instructions.
7. While the green and yellow LEDs alternate blinking on the Wi-Fi hub, press and release
BUTTON 1 on the Wi-Fi hub to program to the garage door opener.
8. Press and release BUTTON 1 on the Wi-Fi hub to activate the garage door opener. If the
garage door opener does not activate, repeat steps 3-8.
9. To exit programming mode, press and hold the
BUTTON on the Wi-Fi hub until the
blue LED blinks.
Programming
Wi-Fi Hub
BUTTON (Settings)
BUTTON 1
BUTTON 2
