1
2
4
3
7
LOCK
LIGHT
5
LOCK
LIGHT
6
LOCK
LIGHT
23
Program your Keyless Entry
(optional)
Activate the opener only when door is in
full view, free of obstruction and properly
adjusted. No one should enter or leave
garage while door is in motion. Do not
allow children to operate push button(s)
or remote(s). Do not allow children to play
near the door.
NOTE:
Your new Keyless Entry must be
programmed to operate your garage door
opener.
Program the Receiver to Match Additional
Remote Control Code
Using the orange “LEARN” Button:
1. Press and release the orange “learn”
button (1) on opener. The learn indicator
light will glow steadily for 30 seconds.
2. Within 30 seconds, enter a four digit
personal identification number (PIN) of
your choice on the keypad (2), then press
and hold the ENTER button.
3. Release the button when the opener light
blinks (3). It has learned the code. If the
light bulb is not installed, two clicks will be
heard.
NOTE:
This method requires two people if
the Keyless Entry is already mounted outside
the garage.
Using the Multi-Function Door Control:
4. Enter a four digit personal identification
number (PIN) of your choice on the
keypad, then press and hold ENTER.
5. While holding the ENTER button, press
and hold the LIGHT button on the
Multi-Function Door Control.
6. Continue holding the ENTER and LIGHT
buttons while you press the push bar on
the Multi-Function Door Control (all three
buttons are held).
7. Release buttons when the opener light
blinks. It has learned the code. If the light
bulb is not installed, two clicks will be
heard.
LOCK
LIGHT
24
Using the Wall-Mounted Door Control
(optional)
THE MULTI-FUNCTION DOOR CONTROL
Press the push bar (1) to open or close the door. Press again
to stop the door.
Light feature
Press the Light button (2) to turn the opener light on or off. It
will not control the opener light when the door is in motion. If
you turn it on and then activate the opener, the light will
remain on for 2-1/2 minutes. Press again to turn it off sooner.
Lock feature
Designed to prevent operation of the door from hand-held
remote controls. However, the door will open and close from
the Door Control, the Outside Keylock and the Keyless Entry
Accessories.
To activate, press and hold the Lock button (3) for 2 seconds.
The push bar light will flash as long as the Lock feature is on.
To turn off, press and hold the Lock button again for
2 seconds.The push bar light will stop flashing. The Lock
feature will also turn off whenever the “LEARN” button on the
opener panel is activated.
14
1
2
3
