Chamberlain LM3800W Manual Download Page 20

20 / en

Garage Door Openers are Not Toys

Discuss garage door and opener safety with your children. Explain the danger of being trapped under the door.

GARAGE DOOR OPENER SAFETY – AN AUTOMATIC DECISION

Stay away from a moving door.

Keep transmitters and remote controls out of reach 
of children

. Do not let children play with or use 

transmitters or other remote control devices.

The wall-mounted push button should be out of reach of 
children

, at least 1.5 m from the nearest standing surface 

and away from all moving parts. Mount and use the button 
where you can clearly see the closing garage door.

Keep the door in sight until it completely closes

 when us-

ing the wall-mounted push button or transmitter.

A garage door is the largest moving object in the home. An improperly adjusted garage door and opener can exert deadly force when the 
door closes – which could lead to entrapment of children or adults and subsequent injury or death.

Proper installation, operation, maintenance, and testing of the garage door and automatic opener are necessary to provide a safe, trouble-free 
system. Careless operation or allowing children to play with or use garage door opener controls are also dangerous situations that can lead to tragic 
results. A few simple precautions can protect your family and friends from potential harm. Please review the safety and maintenance tips in this 
brochure carefully and keep it for reference. Check the operation of your garage door and opener to ensure they function in a safe and trouble-
free manner. Be sure to read all Important Safety Information found in your garage door opener’s manual as it provides more details and safety 
considerations than can be supplied with this brochure.

35

Automatic Garage Door Opener Safety & Maintenance Guide

Summary of Contents for LM3800W























Reviews: