Mounting Tape
Alcohol Wipe
Intercom
Carton Inventory
Overview
The Intercom allows multiple simultaneous
conversations, using a 900 Mhz secure digital radio
link. The intercoms form an exclusive network and
respond only to other intercoms in the network.
The Intercom is compatible with various Liftmaster
Wireless Products.
NOTE:
The intercom cannot be used as a control
device.
1
Model FDI
Door Intercom
Installation
Step 1
Mount intercom with small silver screws. Screw the
top two screws halfway into the mounting surface.
Place back of intercom over screws. Tighten screws.
Refer to page 3 for mounting template.
The intercom can be mounted by using the included
screws or by using the double-sided mounting tape. It
is recommended to use the mounting tape on
surfaces such as metal or glass.
Mounting with Screws
Put the remaining silver screws into the bottom holes
of intercom. Tighten screws.
Step 2
Step 1
Peel off white paper from mounting tape. Firmly press
mounting tape on back of intercom.
Peel paper from mounting tape. Firmly press
intercom onto mounting surface.
Clean back of intercom and mounting surface using
the alcohol wipe.
Mounting with Tape
Step 2
Step 3
