SINGLE SLIDE OPENING WIDTH
PREPARATION
3
1. Unpack carton, checking for possible damage
during shipping. Damage claims must be filed with
the freight carrier. Check that the nameplate data
accurately specifies the operator that was ordered.
Verify that the following parts listed below are
included in the carton.
2.
Check to make sure that the available power
supply to be connected to the operator is of the
same voltage, phase, frequency, and wattage as
indicated on the nameplate of the operator.
3. In order for the door operator to function
correctly, it is important that the door be properly
aligned and working smoothly. Make any necessary
corrections to the door to assure this before
beginning operator installation. In addition,
disconnect and remove all locking devices from the
door to prevent damage or personal injury due to
accidental locking.
This manual supplement includes only
mechanical assembly instructions for your
slide door operator. For complete list of
operator features, specifications and wiring
instructions, refer to the Owners Manual
supplied with your operator.
IMPORTANT
KIT PART #
DESCRIPTION
*K77-10473
Complete Hardware Kit for Single Slide door
*K77-10474
Complete Hardware Kit for Bi-Sliding doors
K75-10470
Trolley Slider Kit for Single Slide door
K75-10471
Trolley Slider Kit for Bi-Sliding doors
K75-10469
Door Disconnect Kit
K75-16339
Wall Bracket Kit
HARDWARE KITS
PART #
BI-PART SLIDE OPENING WIDTH
To 8’
10-5808
19-5114
4
DESCRIPTION
Track
Roller Chain
Wall brackets
See chart
See chart
K75-16339
14’
10-5814
19-5114
4
12’
10-5812
19-5114
4
10’
10-5810
19-5114
4
16’-20’
10-5820
19-5120
5
22’-24’
10-5824
19-5124
6
To 8’
10-5812
19-5114
4
12’-16’
10-5820
19-5118
6
8’-12’
10-5814
19-5116
5
16’-20’
10-5824
19-5120
6
* (4) wall brackets are included in the standard hardware kit. Single doors over 14’ or Bi-Part doors over 8’ will
require additional wall brackets, refer to chart.
