1. Press the Prog <Learn> button on the
Motion Detecting Control Console.
2. Press the Prog <Learn> button again
to confirm Learn Mode.
3. Enter a four digit personal
identification number (PIN) of your
choice on the keypad. Then press
ENTER.
4. When the opener unit lights flash, it
has learned the code. If light bulbs
are not installed, two clicks will be
heard.
USING THE MOTION DETECTING CONTROL PANEL
TO PROGRAM YOUR KEYLESS ENTRY SYSTEM
NOTE:
This method requires two people if the Keyless
Entry is already mounted outside the garage.
USING THE MOTION DETECTING CONTROL PANEL
TO PROGRAM YOUR TRANSMITTER
1. Press the Prog <Learn> button on the
Motion Detecting Control Console.
2. Press the Prog <Learn> button again
to confirm Learn Mode.
3. Press the button on the hand-held
transm
itter
*
that you wish to operate
your garage door.
4. When the opener’s light flashes, it has
learned the code. If light bulbs are not
installed, two clicks will be heard.
Chamberlain Australia Pty Ltd
PO Box 1446
Lane Cove NSW 1595
Chamberlain New Zealand Ltd
PO Box 100-221
North Shore 0745
www.chamberlainanz.com
PROGRAMMING WIRELESS DEVICES USING THE C198
CONTACT DETAILS:
Chamberlain Australia Pty Ltd
PO Box 1446
Lane Cove NSW 1595
1800 638 234
Chamberlain New Zealand Ltd
PO Box 100-221
North Shore 045
0800 653 667
www.chamberlainanz.com
