Press the push bar to open or close the door. Press again to re-
verse the door during the closing cycle or to stop the door while it
is opening.
This door control contains a motion detector that will automati-
cally turn on the light when it detects a person entering the
garage. This feature can be easily turned off for extended work
light use.
Light Feature
Press the Light button to turn the opener light on or off if desired
(the 2-1/2 minute timer will automatically re-engage upon activa-
tion of the opener).
Lock Feature
Designed to prevent operation of the door from hand-held trans-
mitters. However, the door will open and close from the wired
Door Control, the Outside Keylock and the Keyless Entry
Accessories.
To activate, press and hold the Lock button for 2 seconds. The
push bar light will flash as long as the Lock feature is on. Locked
mode will display on LCD.
To turn off, press and hold the Lock button again for 2 seconds.
Locked mode no longer displayed. The Lock feature will also turn
off whenever the “learn” button is activated.
Motion Detecting Light Feature
The opener light will turn on automatically when a person walks in
front of the wall-mounted control console. This feature works by
detecting motion and body heat and may not work in tempera-
tures around 100
0
F or 37.7
0
C. The opener light will turn on for 2-
1/2 minutes, then shut off automatically if no further heat and
movement is detected.
To disable this feature, press the Motion Detecting Light
On/Off button on the left side of the control
console.
It is recommended that the motion sensor be disabled
when using the opener lights as working lights to ensure the lights
do not time out whilst you are working beyond the sensor range.
(Prog) Learn Feature
The control console is equipped with a Prog<LEARN> button to
assist in learning transmitters to the unit. Press the Prog<LEARN>
button once to initiate LEARN mode and the display will show
‘Learn Remote Control-Press Learn Button Again to Confirm’.
Press the Prog<LEARN> button a second time and the display
will show ‘Learn Mode – Press Remote Control Button to Learn
Remote’. Press the button of the remote control to be learned and
the opener light will flash to confirm the transmitter has been
learned.
Hour & Minute Feature
Press or hold either of these buttons to increment the hour or
minute displayed on the LCD display.
(Lang) Language Feature
Press this side button to toggle between the three languages –
English, Spanish and French.
Degrees F/C Feature
Press this side button to toggle the temperature units between
Fahrenheit and Celsius.
Additional feature when used with the 3-button hand-held
transmitter.
To control the opener lights:
In addition to operating the door, you
may program the transmitter to operate
the lights.
1.With the door closed, press and hold the button that you want
to control the light.
2.Press and hold the Light button on the door control.
3.While holding the Light button, press and hold the Lock button
on the door control.
4.After the opener lights flash, release all buttons.
Motion Sensing
ON/OFF
Prog <LEARN>
Hour
Minute
Language
Degrees (F/C)
Lock Button
Light Button
Push Bar
USING THE C198 LCD MOTION
DETECTING CONTROL
LIGHT
LOCK
H
M
