Copyright © 2015 Alarm.com
|
www.alarm.com
|
v4.0
LiftMaster MyQ
®
|
Installation Guide
Method 3: Using the Customer Website
Note:
You cannot register MyQ® Garage through Alarm.com if it is already
registered through MyQ®/Liftmaster/Chamberlain or other similar apps. (See
Troubleshooting section).
1)
Make sure the LED on the Hub is green before registering through the
Alarm.com Customer Site.
2)
Please make sure the customer account has the appropriate add-ons.
3)
Find the “Garage” sub-tab under emPower.
4)
Click “Get Started” and enter the Wi-Fi Hub’s serial number. The serial
number can be found at the back of the Hub below the barcode. Please
wait patiently as this process may take several minutes.
5)
Select “Add Garage Door opener with door sensor” and select garage
door opener brand.
6)
Select “Add Device” for the Wi-Fi Hub that was just added. You may need
to refresh the page first.
7)
Follow the instructions presented to add door sensor(s) and garage door
opener(s) to the system.
