Copyright © 2015 Alarm.com
|
www.alarm.com
|
v4.0
LiftMaster MyQ
®
|
Installation Guide
4)
Press and release the BUTTON. The Yellow and Green LEDs will blink.
5)
Press and release the LEARN button on the garage door opener.
6)
Press and release BUTTON 1 until the garage door opener clicks. Press and release BUTTON 1 again to activate the garage door opener. If the garage
door opener does not activate, press and release the BUTTON, then repeat steps 3-6.
7)
To exit programming mode, press and hold the BUTTON until the Blue LED blinks (if Wi-Fi is not set up) OR the Green LED turns on (Wi-Fi has already
been connected)
Erase Wi-Fi Settings from Wi-Fi Hub
Press and hold the BUTTON until the Blue LED blinks.
Erase Door Sensors from Wi-Fi Hub
Press and hold the BUTTON 1 or 2 that is connected to the door sensor until the Yellow LED turns off.
If you are still unable to resolve your issue, contact us at
