background image

 

© 2008, The Chamberlain Group, Inc.

114A3634B 

All Rights Reserved

LIFTMASTER GARAGE DOOR OPENER FIVE-YEAR LIMITED WARRANTY

LIFETIME MOTOR AND BELT LIMITED WARRANTY

The Chamberlain Group, Inc. (“Seller”) warrants to the first retail purchaser of this product, for the residence in which this product is 
originally installed, that it is free from defect in materials and/or workmanship for a period of five years from the date of purchase and 
that the motor is free from defect in materials and/or workmanship for the lifetime of the product. The proper operation of this product is 
dependent on your compliance with the instructions regarding installation, operation, maintenance and testing. Failure to comply strictly 
with those instructions will void this warranty in its entirety.

If, during the limited warranty period, this product appears to contain a defect covered by this limited warranty, call 
1-800-528-9131, toll free, before dismantling this product. Then send this product, pre-paid and insured, to our service center for warranty 
repair. You will be advised of shipping instructions when you call. Please include a brief description of the problem and a dated proof-of-
purchase receipt with any product returned for warranty repair. Products returned to Seller for warranty repair, which upon receipt by 
Seller are confirmed to be defective and covered by this limited warranty, will be repaired or replaced (at Seller’s sole option) at no cost 
to you and returned pre-paid. Defective parts will be repaired or replaced with new or factory-rebuilt parts at Seller’s sole option.

THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, AND OF ANY OTHER 
OBLIGATIONS OR LIABILITY ON SELLER’S PART. THIS LIMITED WARRANTY DOES NOT COVER NON-DEFECT DAMAGE, 
DAMAGE CAUSED BY IMPROPER INSTALLATION, OPERATION OR CARE (INCLUDING, BUT NOT LIMITED TO ABUSE, 
MISUSE, FAILURE TO PROVIDE REASONABLE AND NECESSARY MAINTENANCE, UNAUTHORIZED REPAIRS OR ANY 
ALTERATIONS TO THIS PRODUCT), LABOR CHARGES FOR REINSTALLING A REPAIRED OR REPLACED UNIT, REPLACEMENT 
OF BATTERIES AND LIGHT BULBS OR UNITS INSTALLED FOR NON-RESIDENTIAL USE.

THIS LIMITED WARRANTY DOES NOT COVER ANY PROBLEMS WITH, OR RELATING TO, THE GARAGE DOOR OR GARAGE 
DOOR HARDWARE, INCLUDING BUT NOT LIMITED TO THE DOOR SPRINGS, DOOR ROLLERS, DOOR ALIGNMENT OR 
HINGES. ANY SERVICE CALL THAT DETERMINES THE PROBLEM HAS BEEN CAUSED BY ANY OF THESE ITEMS COULD 
RESULT IN A FEE TO YOU. 

UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES 
ARISING IN CONNECTION WITH USE, OR INABILITY TO USE, THIS PRODUCT. IN NO EVENT SHALL SELLER’S LIABILITY FOR 
BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE OR STRICT LIABILITY EXCEED THE COST OF THE 
PRODUCT COVERED HEREBY. NO PERSON IS AUTHORIZED TO ASSUME FOR US ANY OTHER LIABILITY IN CONNECTION 
WITH THE SALE OF THIS PRODUCT. 

Some Provinces do not allow the exclusion or limitation of consequential, incidental or special damages, so the above limitation or 
exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from 
province to province.

LIFTMASTER SERVICE IS 

ON CALL

OUR LARGE SERVICE ORGANIZATION

 SPANS AMERICA AND CANADA

INSTALLATION AND SERVICE INFORMATION IS AS 

NEAR AS YOUR TELEPHONE. SIMPLY DIAL OUR 

TOLL FREE NUMBER:

1-800-528-9131

www.liftmaster.com

For professional installation, parts and service, 

contact 

your local LIFTMASTER/CHAMBERLAIN dealer. Look for 

him in the Yellow Pages, or call our Service number for a 

list of dealers in your area.

HOW TO ORDER

REPAIR PARTS

Selling prices will be furnished on request or parts will be 

shipped at prevailing prices and you will be billed 

accordingly.

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE 

FOLLOWING INFORMATION:

  • 

 

PART NUMBER

  • 

PART 

NAME

  • 

MODEL 

NUMBER

ADDRESS ORDERS TO:

THE CHAMBERLAIN GROUP, INC.

Technical Support Group

6050 S. Country Club Road

Tucson, Arizona 85706

SERVICE INFORMATION

TOLL FREE NUMBER:

1-800-528-9131

Summary of Contents for 3585CS 3/4HP

















































































Reviews: