Challenger
Optics.com
Wavelength Specific Optical Testing and Measurement Equipment
Challenger
Optics.com
Wavelength Specific Optical Testing and Measurement Equipment
Chapter 3.0 - Laser Source Operation
/ 05
LASER SOURCE OPERATION
The Laser Output units are displayed
in the center of the screen. (shown
here in nm) Touch this value to cycle
through units of, Wavelength (nm),
Frequency (THz) and Channel (Ch).
Initialize the Step Size by touching
the indicator to cycle through step
sizes. Sizes of 0.40/0.80/1.60nm for
wavelength, 50/100/200 GHz for
frequency or 0.5/1.0/2.0 Ch for
channel is displayed.
Touch the power value and a numeric
keypad will be displayed. Enter the
desired power value within the ranges
set at the top of the and touch OK.
Continued
Chapter 3.0 - Laser Source Operation
/ 06
Touch the dwell time and a
numeric keypad will be displayed.
Enter any value between 0 and 60
seconds. Choose a value of zero
for Constant source operation.
Touch and hold the blue
wavelength/frequency/channel
selector on the scale. Drag the
selector to the desired output
value. Alternately the up and
down a channel select buttons
may be used.
Touch the laser icon or the laser
start/pause to energize the laser.
Touch a second time to turn off
the laser.
or
or
