2
Symbols used in the Manual
The signage (ISO) indicated below is used within this manual to focus attention on those operations
that must be performed carefully in order to guarantee safety during installation.
GENERAL
DANGER
Indicates that, when performing the operation,
great care must be taken to prevent the onset of
events that could cause serious injury or damage.
ELECTRICAL
DANGER
Indicates that, when performing the operation, an
event (of an electrical nature) could arise leading
to injury or damage.
DANGER OF
PINCHING
Indicates that, during installation or transport of
system components, suitable lift equipment must
be used and utmost attention applied.
DANGER OF
FALLING
Indicates that, during installation, the operator
crosses zones where there is high risk of falling;
always be particularly careful.
IMPORTANT
Indicates that the indications or instructions
described in the text must be followed to the
letter. Non-compliance with the indications can be
dangerous for the operator and can damage the
system.
PROHIBITION
Indicates that the specific activity or operating
sequence must be avoided
Technical Data
LIFT CAPACITY
14,000 lbs.
MOTOR POWER
3 HP
ELECTRIC POWER SUPPLY
1 Ph
208-240V
23 A
3 Ph
230V
13 A
60 Hz
PNEUMATIC SUPPLY
90-120 PSI
20 CFM
Filtered and
lubricated
MAXIMUM HYDRAULIC PRESSURE
4150 PSI
QUANTITY OF OIL
5.3 Gallons (20 Liters)
UPSTROKE/DOWNSTROKE TIME
75 sec / 20 sec
MIN/MAX OPERATING TEMPERATURE
-10 / +40 °C
Summary of Contents for SX14
