Customer Helpline
0345 640 0800
10
Maintenance
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the ventilation slots. This is normal
and will not damage your power tool.
Trouble Shooting
Problem
Possible cause
Solution
1. Charger not plugged into a
working outlet.
2. Surrounding air temperature
is too hot or too cold.
Forward/Reverse switch at
middle position
1. Plug charger into a working
outlet. Check current by plugging
in a lamp.
2. Move charger to an appropriate
place which temperature is
suitable for the charger.
Switch cannot be
pressed
Battery will not
charge
Make sure switch is on Forward or
Reverse rotation according to
project need.
Technical Data
Technical Data Table
Voltage
3.6V DC
Battery capacity
1.3Ah Lithium-ion (4.68Wh)
No-load speed
180/min
Max torque
4 N.m
Charging time
Charger input
3-5hrs
100-240V ~ 50/60Hz 0.2A
300g
Charger output
Machine weight
5V
600mA
