background image

  

17

Customer Helpline 

 01904 727503

www.gardenservicecentre.co.uk

  

Recycling and Disposal

Disposal Instructions

1.  Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and 

packaging should be sorted, taken to the local recycling centre and disposed of in an 

environmentally safe way.

2. 

Recycle rather than dispose of unwanted material in landfill whenever possible. The machine 

must be delivered in rigid packaging to avoid damage during transportation. The packaging 

and the machine itself are manufactured from recyclable materials and should be disposed of 

accordingly.

3.  Do not throw your clippings into a rubbish bin where it will dispose of clippings on your 

compost heap, alternating then with other garden material. The more thoroughly you chop 

the clippings beforehand, the more rapidly they will degrade. Alternatively, many communities 

provide a public collection point where you can dispose of your garden waste in an 

environmentally friendly manner.

4.  Only dispose of electrical/electronic/battery iterms in separate collection schemes, which cater 

for the recovery and recycling of materials contained within. Your cooperation is vital to ensure 

the success of these schemes and for the protection of the environment.

5. 

Recycle packaging where facilities exist.

6.  This symbol is known as the Crossedout Wheelie Bin Symbol. When this symbol is marked 

on a product or battery, it means that it should not be disposed of with your general household 

waste.Some chemicals contained within electrical/electronic products or batteries can be 

harmful to health.

Summary of Contents for N1F-GT-220/250-C




















Reviews: