12
Customer Helpline
01904 727503
www.gardenservicecentre.co.uk
Cutting grass
Manually feed the line
Operation
4. If the grass is very long cut in stages rather than trying to cut in one ago. Do not overload
your trimmer, take small cuts this will keep machine operating at high speed and will greatly
improve cutting efficiency.
If required, line can be fed out manually. To operate, press and release manual line feed button,
while gently pulling out the lines until the lines reach the line cutter.
When the required amount of line is fed out, gently pull on the second line (there is no need to
press the manual line feed button again), If the line extends past the line cutter, too much line has
been fed out.
If too much line is fed out, remove the spool cap and turn spool counter-clockwise until the line is
at the desired length .
