Challenge MSCM, Instructions And Parts Manual

Page: 6 / 41

2.0 Safety
4
2.0 Safety
2.1 Precautions
•
By nature of the functions the cornering machine performs, it has some inherent dangers
associated with its use. Read and thoroughly understand the safety precautions outlined below.
•
This machine is designed for one-person operation. Never operate the machine with more than
one person.
•
Cut/crush hazard. Keep hands from under the knife and plunger while in operation.
•
Do not operate with any covers removed.
•
Safe use of this machine is the responsibility of the operator. Use good judgment and common
sense when working with and around this machine.
•
Read and understand all instructions thoroughly before using the machine. If questions remain,
contact your Authorized Challenge Dealer. Failure to understand the operating instructions may
result in personal injury.
•
Only trained and authorized individuals should operate this machine.
•
Disconnect power before performing maintenance. See Section 2.2 , Power Lockout Procedure.
•
Observe all caution labels on this machine.
•
When replacing hydraulic parts, loosen the connections slowly to relieve pressure. Never loosen
connections while the machine is running. Allow hydraulic fluid to cool before performing
maintenance on the hydraulic system.
•
Never leave the machine unattended while running.
•
If the machine operates abnormally, consult Appendix C- Troubleshooting.
2.2 Power Lockout Procedure
For maximum safety while making adjustments or repairs to your machine, be sure to disconnect
power from the machine. Disconnect the power plug from its socket.
Figure 1 – Main Power Disconnect