1.0 Introduction
2
1.0 Introduction
Keep this manual in a safe, convenient place for quick reference by operators and service personnel.
SAFETY ALERT!
This symbol means
CAUTION: Personal safety
instructions!
Pay special attention to the instructions in bold type.
Personal injury may result if the precautions are not read and followed.
READ THIS MANUAL BEFORE OPERATING!
If you follow precautions and instructions, you should
have years of trouble-free operation. Contact your Authorized Challenge Dealer for replacements.
FOR PARTS AND SERVICE,
contact the Authorized Challenge Dealer from whom you purchased
your machine. Use the illustrations and parts lists at the back of this manual to identify the correct
parts needed. Always give the
SERIAL NUMBER
and
MODEL
of your machine to insure the correct
parts are sent as soon as possible.
RECORD YOUR MACHINE SERIAL NUMBER
in the space provided on the front cover of this
manual. Also fill out the warranty card accompanying this manual and return it
DIRECTLY TO
CHALLENGE.
If you bought a used machine, it is important to have the following information on record at Challenge.
Copy this page, fill in the information and send it care of The Challenge Service Department, 6125
Norton Center Drive
•
Norton Shores
•
MI 49441-6081.
CHALLENGE MODEL
SERIAL NUMBER
ATTN COMPANY
ADDRESS
CITY STATE/PROVINCE
ZIP
PHONE DATE
INSTALLED
DEALER NAME & CITY
* WARRANTY INFORMATION *
PLEASE REVIEW THE ENCLOSED WARRANTY INFORMATION SHEET
It is very important that you read and understand the conditions outlined in the
Warranty Information
Sheet
attached to the outside of the shipping container of your machine.
The
Warranty Information Sheet
must be filled out completely and returned to THE CHALLENGE
MACHINERY COMPANY in order for the warranty to be issued for this machine.
Challenge® is a registered trademark of
The Challenge Machinery Company
•
6125 Norton Center Drive
•
Norton Shores, MI 49441-6081
Copyright© 2009 by The Challenge Machinery Company. All rights reserved. Printed in the USA.
Summary of Contents for MSCM
