15
14
Customer Helpline
01904 727508
www.coreservice.co.uk
Customer Helpline
01904 727508
www.coreservice.co.uk
WARNING!
Always turn off the machine when changing the high pressure lance. The trigger gun is
subjected to a recoil force when the water jet is discharged. Make sure that you have a firm footing and
are also holding the trigger gun and spray lance with both hands.
Operate the Pressure Washer
Step 3- Use the high pressure lance
1. Hold the hand-held spray lance and the jet tube firmly with both hands. Be aware of the recoil when
switching on the high-pressure jet.
2. Unlock the safety button and press the trigger on the handheld spray lance. It takes approximately 5
seconds to release the high pressure.
NOTE!
Clogging of the spray tips causes the pump pressure to be too high and cleaning is immediately
required. You can clean the spray tips by carefully inserting a using the supplied cleaning pin into the
tip to remove deposits.
2
1
CAUTION!
- Jet spray adjustment is very aggressive. Do not adjust while spraying. Switch the machine off when
interrupting your work for extended periods of time.
- The high-pressure pump starts running as soon as you operate the hand-held spray gun. The high-
pressure pump stops running as soon as you release the trigger on the hand-held spray gun.
Step 3- Use the high pressure lance (continued)
Operate the Pressure Washer
3. Use with adjustable spray lance, 180 degree rotation of the nozzle. It takes a couple of seconds for
the spray to adjust to setting.
The trigger gun safety lock prevents the trigger from being engaged accidentally and ensures the trigger
gun cannot be locked in the ON position.
Without turning the gun, adjust the spray to desired angle by turning the nozzle with 180° marking as
shown.
