Safety Information
Safety Information
Important - Please read these instructions fully before operating or maintaining
6
Important - Please read these instructions fully before operating or maintaining
7
Customer Helpline
01904 727508
www.coreservice.co.uk
Customer Helpline
01904 727508
www.coreservice.co.uk
Important - Please read these instructions fully before operating or maintaining
- Water that has flown through backflow preventers is
considered to be non-potable.
- The PVC or polychloroprene sheathed power cord,
or extension cables (H05VV-F) are acceptable for
use at temperatures at or above 0
O
C.
- Always ensure that a machine which has been
switched off and cannot be restarted unintentionally.
- Only use hoses, fittings and couplings supplied and
recommended by the manufacturer.
- Never carry the equipment by the cable or the
hose. Do not carry the equipment with your finger on
the On/Off switch when it is connected to the mains.
- Remove the plug from the plug socket if you are not
using the equipment, when transporting it or when
it is left unattended, when checking the equipment,
cleaning it or removing blockages, when undertaking
maintenance work or changing accessories, if the
power or extension cable is damaged, after contact
with foreign bodies, or in the event of abnormal
vibration.
- Do not use the equipment near flammable liquids or
gases. In case of non-observance, there is a risk of
fire of explosion.
- Do not use the pressure washer if a supply cord,
safety devices, hoses, switch or trigger gun is
damaged.
WARNING!
Inadequate extension cords can be
dangerous. If an extension cord is used, it shall be
suitable for outdoor use, and the connection has to
be kept dry and off the ground. It is recommended
that this is accomplished by means of a cord reel
Operating Safety
WARNING!
- High-pressure hose fittings and couplings are
important for the safety of the appliance. Use only
hose fitting and couplings recommended by the
manufacturer.
- Inadequate extension cables can be dangerous.
- The electric supply connection shall be made by a
qualified electrician and comply with IEC60364-1. It is
recommended that the electric supply to this machine
should include either a residual current device that
will interrupt the supply if the leakage current to earth
exceeds 30 mA for 30 ms or a device that will prove
the earth circuit.
- Disconnect from the electrical power supply before
carrying out user maintenance.
- Don’t use the appliance if a supply cables or
important parts of the appliance are damaged, e.g.
safety devices, high-pressure hoses, trigger gun.
- If extension cable is used, the plug and socket outlet
must be of a watertight construction.
- If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
Personal Safety (continued)
hearing protection etc. which shall be worn while
operating the equipment.
- The operator or user is responsible for accidents or
damages to other people or their property.
Operating Safety (continued)
