Challenge E0111R Operating Instructions Download Page 3

ƒ

 

Use a damp cloth to wipe the exterior of the heater to remove dust and dirt.  

ƒ

 

Use a vacuum cleaner to remove dust and fluff from the inlet and outlet grilles.  

ƒ

 

Ensure the heater is dry before plugging back into the mains supply. 

ƒ

 

If the heater has collected dust or dirt inside the unit or around the element, have the unit cleaned 

by a qualified service agent. Do not operate the heater in this condition. 

 

 
CONNECTION TO POWER

 

Before Switching on make sure that the voltage of your electricity supply is the same as that indicated 

on the rating plate   

 

MAIN CORD 

This appliance may be fitted with a non-rewireable plug. 

If it is necessary to change the fuse in a non-rewireable plug the fuse cover must be refitted. If the 

fuse cover is lost or damaged, the plug must not be used until a replacement is obtained. 

It is important that the color of the replacement fuse cover corresponds with the colour marking on the 

base of the plug. 

If the plug has to be changed because it is not suitable for your socket, or becomes damaged, it 

should be cut off and an appropriate plug fitted following the wiring instructions below. 
The plug removed must be disposed of 

safely as insertion into a 13A socket is 

likely to cause an electrical hazard. For 

your own safety read the following 

instructions carefully before attempting 

to connect this unit to mains. The wires 

in this mains lead are coloured in 

accordance with the following code:  

BLUE = NEUTRAL 

BROWN – LIVE 

 

IMPORTANT 
As the colours of the wire in the mains 

lead of this appliance may not correspond with the coloured markings identifying the terminals in your 

plug, proceed as following:- 

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or 

coloured black. 

The wire which is coloured brown must be connected to the terminal which is marked with the letter L 
or coloured red. 

No connection is to be made to the earth terminal of the plug. 

If a 13 Amps (BS 1363) plug is used, it must be fitted with a 13 Amp Fuse conforming to BS1362 and 

be ASTA approved. If  in doubt consult a qualified electrician who will be pleased to do this for you. 

 

Waste electrical

 

products should not be disposed of with household waste. Please 

recycle where facilities exist. Check with your local authority or retailer for recycling 

advice. 

 

 

 

 

 

 

BLUE 

(NEUTRAL) 

N

BROWN 

(LIVE) 

L

OUTER 

SLEEVE 

FUSE

Reviews: