13
12
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
Cleaning the Air Filter
Replacing the Spark Plug
Cleaning the air filter
1) Loosen the screw from the air filter housing and remove the cap.
2) Remove the air filter.
3) Wash the air filter in warm water (with a small amount of detergent).
4) Rinse the air filter through with clean water.
5) Leave the air filter to dry out completely.
6) Replace the air filter.
7) Replace the cover with the lugs positioned in the notches in the air filter casing.
8) Close the lid, and tighten the bolt again by hand.
Replacing the spark plug
(Spark plugs: L8RTF).
1) Pull off the ignition cable plug.
2) Use the multifunctional tool to unscrew and remove the spark plug.
3) Insert a new spark plug and tighten it carefully with the multifunctional tool.
4) Snap the ignition cable plug back on.
H=0.6-0.7 mm
Storing the Hedge Trimmer
Maintenance
Maintenance Schedule
Step 1 - Storing the Hedge Trimmer for Short Periods
•
Drain all fuel from tank into a container approved for petrol. Run engine until it stops. Clean
all foreign material from the trimmer. Store it in a well-ventilated place that is inaccessible to
children.
•
Keep away from corrosive agents such as garden chemicals and de-icing salts.
•
Abide by all ISO and local regulations for the safe storage and handling of petrol. Excess fuel
should be used up in other 2-Stroke engine powered equipment.
•
Remove any coarse dirt.
•
Wipe the machine with a soft damp cloth.
Performing routine maintenance correctly on your hedge trimmer will ensure you get years of
trouble free use.
Please keep this manual safe for future reference.
It is recommended that the following maintenance schedule is adhered to. This will ensure the
hedge trimmer operated correctly and is safe to use.
12 hours of use
24 hours of use
36 hours of use
Air filter
clean
clean
replace
Spark plug
check
clean
replace
Step 2 - Storing the Hedge Trimmer for Extended Periods
• Clean air filter.
•
Replace the spark plug with an exact replacement.
Blade lubrication
Ensure that the blade’s cutting edge is always well oiled.
WARNING!
Always switch off the head trimmer and remove the spark plug boot before carrying
out any maintenance work.
NOTE!
Only clean the machine after it has been switched off. Use only mild soap and a damp
cloth to clean it. Never allow fluid to get into the machine. Do not use caustic cleaning products.
List of vulnerable parts
901305
air filter
902700
spark plug L8RTF
901313
Fuel filter
