Challenge Xtreme M1G-ZP-250 Instructions Manual Download Page 2

Instructions

Box contents

• Line Trimmer
• Upper handle 
• Lower handle
• Handle bolt
• Trimmer 

guard

• 

Instruction booklet

• 

2 screws and washers

You may also need: 

• A screwdriver

Please check that you have the following apparatus in the box that your line trimmer arrived in:

• Make sure you are familiar with the controls and the proper safe use of the line trimmer.
• Never allow children or people unfamiliar with these instructions to use the line trimmer.
• Make sure all people especially children or pets are at least 6 metres away from the cutting area. 
• Thoroughly inspect the area where the line trimmer is to be used and remove all stones, sticks,

wires, bones, string and other foreign objects.

• Before using the line trimmer always inspect it to check the cutting line is not worn or damaged.

Worn or damaged items should be replaced before use. 

• Make sure the spool is properly installed and securely fastened. Failure to do this could

cause injury.

• Make sure the guard and handle are securely attached.
• Never use metal cutting elements with the line trimmer.
• If you need to use an extension cable it must be marked as suitable for outdoor use.  
• The line trimmer user is responsible for accidents or hazards occurring to other people or

their property.

Model Number

M1G-ZP-250

Rated Voltage

230 VAC 50Hz

Input Power

3

5

0 Watts

Cable Length

10 

m

Weight

2

.4

 Kg

Cutting Width

2

5

0 mm

No load speed

11,000 rpm

Cutting Line

4.5

 metres max

Preparation

Product specification 

Instructions

Use your Line trimmer safely

• Do not operate the line trimmer barefoot or wearing open sandals, always wear

substantial footwear and long trousers. Do not wear loose fitting clothing.

• Wear safety goggles or glasses and ear protectors when using the line trimmer. 

Use a face mask if the work is dusty.

• Do not operate the line trimmer when you are tired, ill or under the influence of alcohol,

drugs or medication.

• Secure long hair so it is above shoulder level to prevent entanglement in any

moving parts.

• Keep all parts of your body away from any moving parts.
• Only use the line trimmer in daylight or good artificial light.
• Avoid using the line trimmer on wet grass. 
• When trimming slopes always be sure of your footing.
• Switch the line trimmer on by following the instructions in this booklet.
• Switch off the line trimmer, unplug it and wait it has stopped rotating in the 

following instances: 

• When crossing surfaces other than grass.
• When transporting the line trimmer to and from the area to be trimmed.
• Whenever you leave the line trimmer.
• Before clearing a blockage.
• Before checking, cleaning or working on the line trimmer.
• After striking a foreign object. Inspect the line trimmer for damage and make repairs

as necessary.

• If the line trimmer starts to vibrate abnormally.

• Never carry the line trimmer by the cable or pull the cable to disconnect from the 

mains supply.

• Keep the cable away from sharp edges, oils or heat sources. Do not use the line trimmer

if the cable is damaged.

• While using the line trimmer always walk, never run.
• Only use the manufacturers replacement spools. Do not use any other cutting

attachment.

• Do not use without the guards in place.
• Hold both handles while using the line trimmer and do not raise the cutting head above

waist height. Keep the cutting head below 76cm (30 in) from the ground.

Summary of Contents for M1G-ZP-250









Reviews: