11
10
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
Operating the Grass Trimmer
How to Replace the Spool/Spool Line
Step 4 - Extending spool line while trimming
1) While the line spool is running at full speed, tap its underside briefly against the ground.
2) If the spool lines are still not sufficiently extended, tap the underside against the ground again.
3) If the line has already become too short, it will no longer be extended by pressing the
underside against the ground. You must pull it out from the line spool by hand.
4) Switch off the motor.
5) Lay the machine on the ground.
6) Push by hand on the underside of the line spool and pull both lines out until they are
somewhat longer than the edge of the protective bonnet. The lines are trimmed to the correct
length by the line trimming knife.
WARNING!
Ensure there is mixed fuel in tank with the correct ratio of fuel to oil. Make sure all
guards and handles are properly and securely attached.
Dangerous
cutting area
Direction of
rotation
Best cutting
area
Step 2 - Replacing the spool line in the spool
SPRING
SPOOL
ANCHOR
HOLE
ARROWS ON
SPOOL
SLOT
SLOT
ARROWS ON
SPOOL
FIRST LINE
SECOND LINE
FIRST LINE
– Completely remove the remains of the spool.
– Make a nick in the middle of the new line, and hook it into the slot in the spool.
– Wind on a spool line on each side of the spool in the direction of the arrow.
Step 1 - Removing the spool
– Twist off (clockwise to loosen) and remove the cover of the spool.
– Remove the spool.
Do not lose the spring!
SPRING
SLOTS
STRING HEAD
EYELETS
SHAFT
SPOOL COVER
