background image

14. Do not use the tool to vacuum up 

burning or hot material such as cigarettes, 

matches or hot ashes. 

15. Never operate the tool in the vacuum 

mode without the vacuum bag fitted. 

Always ensure that the zip on the bag is 

fully closed. Frequently check the bag for 

signs of wear of deterioration. If the bag 

is damaged, replace it. 

16. Only operate the tool during broad 

daylight or with adequate artificial light. 

17. When the tool is not in use, store it in 

a dry place and out of reach of children. 

18. After use, disconnect the tool from the 

power supply and check for damage. If 

you have the slightest doubts, contact an 

authorized service center. 

19. Only use the tool according to the 

instructions given in this manual. 

20. Check regularly that the screws are 

tight. 

21. Use only spare parts and accessories 

recommended by the manufacturer. 

22. Do not try to repair the tool or access 

internal parts. Contact authorized service 

centers only. 

23. Do not get distracted and always 

concentrate on what you are doing. Use 

common sense. Never operate the tool 

when you are tired, sick or under the 

influence of alcohol or other drugs. 

24. If the blower vac starts to vibrate 

excessively, switch off immediately and 

have it checked by a qualified service 

engineer. 

25. Never run while using the blower vac. 

26. Do not cross roads or gravel paths 

while operating blower vac. 

27. On steep slopes cut across the slope, 

never in an up and down direction. 

28. Do not overreach, keep proper footing 

and balance at all times. 

 

For extra safety a RCD separate circuit 

breaker Max.30mA should be used on all 

mains powered electrical equipment 

which is used outdoors. 

SAVE THESE 

INSTRUCTIONS 

1. TRAINING 

y

  Read the instructions carefully. Be 

familiar with the controls and the proper 

use of the appliance. 

y

  Never allow children to use the 

appliance. 

y

  Never allow people unfamiliar with 

these instructions to use the appliance. 

Local regulations may restrict the age of 

the operator. 

y

  Never operate the appliance while 

people, especially children, or pets are 

nearby. 

y

 

The operator or user is responsible 

for accidents or hazards occurring to other 

people or their property. 

 

2. PREPARATION 

y

 

While operating the appliance, always 

wear substantial footwear and long 

trousers. 

y

  Do not wear loose clothing or 

jewellary that can be drawn into the air 

inlet. Keep long hair away form the air 

inlets. 

y

  Wear protective goggles while 

operating. 

y

 

To prevent dust irritation the wearing 

of a face mask is recommended. 

y

 

Before using, check the supply and 

extension cord for signs of damage and 

aging. Do not use the appliance if the cord 

is damaged or worn. 

y

  Never operate the appliance with 

defective guards or shields, or without 

Summary of Contents for BVA2400















Reviews: