HELPLINE NO 08454 505299
10
ORIGINAL INSTRUCTIONS
1) SWITCHING ON AND OFF
(See Fig. A1,A2)
3) EMPTY DUST BOX (See Fig. C)
4) ATTACHING THE SANDING PAPER
(See Fig. D)
• To switch on, depress the “I” mark on the
shank of the on/off switch (1) to the end.
To switch off, depress the “O “ mark on the
shank of the on/off switch (1) to the end.
2) USING THE DUST COLLECTION BOX
(See Fig. B)
Your sander is equipped with a detachable
dust collection box (4). Connect the dust
collection box to the adapters holes
supplied. Then gently pull the dust box and
make sure it is fitted securely. Sanding dust
is drawn up from the holes in the sanding
base plate and into the dust box during the
sanding operation.
OPERATION
INSTRUCTIONS
NOTE
: Before using the tool, read the
instruction book carefully.
Fig. A1
1
Fig. A2
Fig. B
4
Fig. C
3
For more efficient operation, please empty
the dust box every 15 minutes. This will
permit the air to flow through the box more
efficiently.
To empty the dust box, remove the dust box
from sander, then depress both the dust box
cover clamps (3) to remove the dust box
cover from dust box and shake out dust.
Fig. D
WARNING.
Always ensure that the tool is
switched off and the plug is removed from
the power point before conducting any
adjustments or maintenance.
