6.5 Using the laser (Fig. 8-9)
The laser (15) enables you to make precision
cuts with your circular saw.
The laser light is generated by a laser diode. The
laser light is enlarged to form a line and is emitted
through the laser emission aperture. You can
then use the line as an optical marker for the
sawing line for precision cuts. Follow the laser
safety instructions.
You can switch the laser ON and OFF with the
ON/OFFswitch (14).
dust and chips. The emission aperture of the
laser beam must therefore be cleaned after each
use.
Replacing the battery
. Remove the
battery compartment cover (a).
battery and replace with a new one (button cell
CR2032). Check that the battery terminals are
positioned correctly when inserting the new batteries.
Close the battery compartment again.
Helpline No 0844 801 8701 / IRE 189 094 6244
13
8
9
15
14
a
