Chal-tec 10039551, Manual

Page: 10 / 24

10
EN
2. Adjusting the height
The height adjustment can be used to adjust the handlebars to the height of
the driver. Ideally, the arms should be angled about 45° at the elbow.
• You can pull out the handlebars
as far as they will go. The
handlebars lock and a pin locks
(A) into the safety hole.
• You can also lock the handlebars
in any other position. To do this,
tighten the Allen screw on the
back of the quick release
• (B) and close the quick release.
• As an adult, test with your
weight to see if the handlebar is
securely locked. If you can still
move the handlebars, tighten
the screw further.