Operating Instruction
1.
Only connect the appliance to a correctly installed safety plug (220-240V 50Hz).
2.
Turn the selector switch clockwise to set the toasting level from the lightest stage 1 to the darkest stage
5. If in any doubt, start with the lower setting (the black mark on the selector switch shows you the
setting).
3.
Insert sliced bread into the toasting slot and push down the lever until it locks. One slice per slot.
4.
Once toasting has finished, the toasting slots will pop up. The appliance starts toasting. The appliance
switches off immediately once the set degree of toasting has been reached. The toast then pops up
automatically. The appliance will automatically switch off.
5.
The appliance has heat-insulated “cool touch” casing. However, as metal parts still heat up during
operation, please allow cooling down before you put it away.
Special Functions
If you wish to use the special functions, press the button you wish to select once you have pushed down the
lever. The corresponding control lamp will illuminate displaying its function.
Defrost:
To defrost and toast deep-frozen bread
Reheat:
To reheat toasted bread
Cancel:
To stop toasting prematurely
Bagel:
Toasters centre heating element in use only
Cleaning
Before cleaning, remove the plug from the socket and allow the appliance to cool down.
Use a moderately damp cloth to clean the outside of the appliance.
Do not use any aggressive or scrubbing detergents.
Grasp the crumb shaft by the loop and pull it out, remove the bread residue and push the shaft back in.