Chapter 2
9
DIMM Module Combination
Install at least one DIMM module on the slots. You can install either single- or
double-sided modules in any order to meet your own needs. Memory modules can
be installed in any combination as follows:
Location 64 MB 128 MB 256 MB 512 MB 1.0 GB
DDR
1
X X X X X
DDR
2
X X X X X
DDR
3
X X X X X
To install your DDR Modules please follow the following steps:
1. Unlock a DIMM socket by pressing the retaining clips outward. The DDR
Modules has only one notch at the center of module. The DDR module will only
fit in the right position.
2. Insert the DDR Module vertically into the DIMM slot, with the correct alignment.
Then push it in until the golden finger on the memory module is deeply inserted
into the socket.
3. The plastic clip on each side of the DIMM slot will automatically close to hold the
DDR Modules in place.
Chapter 2
10
2-4 Connector and Jumper Reference Chart
Jump Connector
Function
Page
PW 1/2
ATX Power Supply Connector
11
FD1 Floppy
Connector
12
IDE 1/2
IDE Hard-Disk Connector
13
FAN 1/2/3
CPU/ System / Case FAN Connector (12V)
13
JP1
CMOS Clear Jumper
14
JP3
CPU Front Side Bus setting
14
JP5
Keyboard Power on Function Jumper
15
JP6
Disable/Enable USB 0/1 Device Power ON Jumper
15
JP6A /B
Disable/Enable USB 2/3,4/5 Device Power ON Jumper
16
JP23
Green LED Mode Jumper
16
JP30 ROM
SIP
17
CN1A
Front Panel (Power / Rest / SPK…etc.) Connector
17
CN2 /2A
CD-ROM Audio-in Connector
18
CN3
Auxiliary Audio-in Connector
19
CN5
Wake on LAN Connector
19
CN5A
Wake on Modem Connector
20
CN7
Smart Card Reader Connector
20
CN17
Blue LED Connector (5V)
21
CN23 /23A
USB Connector for USB 2/3 and 4/5
21
CN24 Front
Audio
Connector
22
IR1 IR
Connector
22
