CHAINTECH 7NJL3, User Manual

Page: 24 / 55

Chapter 3
contaminated. Choose the Standard CMOS Setup option from the CMOS Setup
Utility menu (Figure 3-1) to display the following screen.
Date/Time
Set the date and time of the system.
IDE (Primary/Secondary; Master/Slave)
This category identifies up to four IDE hard disk drives that have been installed
in the computer. This section does not show information on other IDE devices
such as CD-ROM drives or other hard drive type such as SCSI drives.
Drive A/B
Select different Floppy device Model. Available options are [None], [360K,
5-1/4 in], [1.2M, 5-1/4 in], [720k, 3-1/2 in], [1.44M, 3-1/2 in], and [2.88M, 3-1/2
in].
Video
Select the type of video adapter present in your system. You can ignore this
setting if you are using a VGA monitor since VGA BIOS automatically
configures this setting.
Halt On
When the system is powered on, BIOS performs a series of diagnostic tests
called POST (Power On Self Test). This function stops the computer if BIOS
detects a hardware error. You can tell BIOS to halt on all errors, no errors, or not
to halt on specific errors.
20