CHAINTECH 7AIV6, Manual

Page: 25 / 49

User's Manual
22
3-1 Standard CMOS Setup 3-1 Standard CMOS Setup
3-1 Standard CMOS Setup 3-1 Standard CMOS Setup
3-1 Standard CMOS Setup
The Standard CMOS Setup allows users to configure system components such as
hard disk drive, floppy disk drive and video display as well as date, time and boot-
up error signaling. This configuration menu should be changed when installing a
mainboard for the first time, changing hardware in your system such as the HDD,
FDD, video display, or when the CMOS data has been lost or contaminated. Choose
the Standard CMOS Setup option from the CMOS Setup Utility menu (Figure 3-
1) to display the following screen.
Date/Time Date/Time Date/Time Date/Time Date/Time
Set the date and time. Do not skip this function as all of your timed events such
as power management, saving files, etc. are based on this timer.
Hard Disk Setup (Primary/Secondary; Master/Slave) Hard Disk Setup (Primary/Secondary; Master/Slave) Hard Disk Setup (Primary/Secondary; Master/Slave) Hard Disk Setup (Primary/Secondary; Master/Slave) Hard Disk Setup (Primary/Secondary; Master/Slave)
This category identifies up to four IDE hard disk drives that have been installed
in the computer. This section does not show information on other IDE devices such
as CD-ROM drives or other hard drive types such as SCSI drives.
Floppy Disk Drives Floppy Disk Drives Floppy Disk Drives Floppy Disk Drives Floppy Disk Drives
Choose the memory capacity and disk size that corresponds with that of your floppy
disk drive(s).
Video Video Video Video Video
Select the type of video adapter present in your system. You can ignore this setting
if you are using a VGA monitor since VGA BIOS automatically configures this setting.
Halt On Halt On Halt On Halt On Halt On
When the system is powered on, BIOS performs a series of diagnotic tests called
POST (Power On Self Test). This function stops the computer if BIOS detects a
hardware error. You can tell BIOS to halt on all errors, no errors, or not to halt on
specific errors.
Date (mm : dd : yy) Thu, Nov 8 2001
Time (hh : mm : ss) 17 : 14 : 44
IDE Primary Master None
IDE Primary Slave None
IDE Secondary Master None
IDE Secondary Slave None
Drive A 1.44M, 3.5 in.
Drive B
None
Floppy 3 Mode Support Disabled
Video EGA/VGA
Halt On All Errors
Base Memory 640K
Extended Memory 30720K
Total Memory
31744K
Item Help
Menu Level
Phoenix - AwardBIOS CMOS Setup Utility Phoenix - AwardBIOS CMOS Setup Utility
Phoenix - AwardBIOS CMOS Setup Utility Phoenix - AwardBIOS CMOS Setup Utility Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features Standard CMOS Features Standard CMOS Features Standard CMOS Features Standard CMOS Features
Figure 3-2 Standard CMOS Features Screen
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults