CHAINTECH 6VJD2 User Manual Download Page 5

Page: 5 / 51

Chapter 1

Double Stack Back-Panel I/O Connectors

- PC99 Compliant color connectors

- PS/2 Mini-DIN keyboard and mouse port

- Two USB ports

- Two 9-pin D-SUB male Serial port

- One 25-pin D-SUB female Printer port

- Audio Line-in/out and Mic-in jacks

- One 15-pin D-SUB female Game/MIDI port

Onboard PCI Audio Subsystem

- CMedia 8738 audio chip w/ legacy audio SB16/Pro compatible

- Advanced 64-voice wavetable synthesizer

- Programmable independent sample rate from 4KHz to 48KHz for recording and

playback

- Full-duplex operation for simultaneous recording and playback

- Supports MS DLS (Downloadable sample) level-1 technology with limitless

variety of instrument samples using PC RAM

- Supports HRTF 3D positional audio with MSDS, DS3D, DirectMusic, Aureal

A3D and Creative EAX (Environment Audio Extensions), C3DX APIs

- 4-Channel speaker audio support is easy to build up a Home Theater

environment

- (Optional) supports Fiber Optic module for Internet music, PC, and MD

connections

- Supports MIDI and dual game ports

Embedded

System Monitor Hardware

- 8 external voltage inputs for Vcore, +/-12v, +5v, 2.5v and 3.3v (internal detecting),

1.5v, vcc5sby

- 1 temperature sensor with thermistor for CPU

- 2 Fan speed (CPU and System) monitoring with CPU Fan ON/OFF control in

suspend

Embedded

USB Controller

- UHCI compliant USB host controller with Root Hub

- Four USB ports (UHCI v1.0 compliant)

- Optional USB riser with additional 2 USB ports

Board Dimensions

- ATX form factor, 305mm x 230mm, 4 Layers

Summary of Contents for 6VJD2




















































Search results

Summary of Contents for 6VJD2

Reviews:

Related manuals for 6VJD2

Brands by name

Popular brands

CHAINTECH 6VJD2, User Manual

Search results

Summary of Contents for 6VJD2

Reviews:

Related manuals for 6VJD2

Brands by name

Popular brands