CHAINTECH 6OIV2, Manual

Page: 23 / 33

Chapter 2
20
Alert On LAN Connector (CN13)
Alert On LAN enabled LAN controller to report
messages to a network management console
without the aid of the system processor. This is
crucial in cases where the processor is
malfuntioning or cannot function due to being in
a low power state. In order to use this function,
the connector must be connected to a LAN card
that support AOL feature.
CPU/CASE Cooling Fan Connectors
(
FAN1/FAN2)
These added connectors allow the fan to draw
their power from the mainboard instead of the disk
drive connector.
The board's management extension hardware is
able to detect the CPU and system fan speed in
rpm (revolutions per minute). These connectors
supports 3-pin cooling fans with minimum of
4500 RPM. The wiring and plug may vary
depending on the manufacturer. On standard fans,
the red is positive (+12V), the black is ground,
and the yellow wire is the rotation signal.
LTI-II Riser (LTI1) Optional
This connector is to be connected to an optional
TV/LCD/2nd CRT Output adapter card.
FAN1
FAN2