CHAINTECH 6OIV2, Manual

Page: 18 / 33

Har dware Setup
15
Audio Line_out or Speaker_out (JP1/JP2)
This jumper allows you to select between audio
line-out or speaker out function. Set both JP2 and
JP3 pins to 1-2 for line-out function or set both JP2
and JP3 pins to 2-3 for speaker out function..
PS/2 Keyboard Power On Function (JP3)
This board is able to be turned on by the keyboard.
To use this function, enable the Power On Function
option in BIOS's Integrated Peripherals screen
(See section 3-8). You must also set this jumper's
cap to pins 2-3 to use this function. Some out-
of-date keyboards may require larger current than
supplied by the Suspend 5V of modern power
supplies. When using older keyboards disable
this function.
USB Device Power On Function (JP4)
This board is able to be turned on by a USB
keyboard (hot key/Password) or a USB mouse
click. To use this function, select a device of your
choice at the Power on Function option in BIOS's
Integrated Peripherals screen. You must also set
jumper caps to pins 2-3 to use this function.
Disabled (default)
Enabled
JP1
JP2
1
Line_out
Speaker_ out (default)
JP1
JP2
Disable(default)
1
Enable