CHAFFOTEAUX HPC 2, Instruction For Installation And Maintenance

Page: 48 / 68

48
GB
I
NTRODUCTION
1. Introduction to the product
1.1. Regulations relating to transportation,
storage and recycling
1. The appliance must be transported in
accordance with the pictograms printed on the
packaging.
2. The appliance must be transported and stored
in dry conditions where it will not be subjected to
freezing.
3. The
EU Directive 2002/96/EC
sets out the
obligation to perform separated waste collection
and to recycle all electrical and electronic
equipment.
The “crossed-out dustbin” symbol on the
appliance indicates that when the product is no
longer in good working condition, it should not
be disposed of in the same manner as normal
household waste. Instead, it should be taken to a
separated waste collection centre which deals with
electrical and electronic equipment or reclaimed
by the distributor when a new appliance has been
purchased to replace it.
Separated waste collection, which ensures the
appliance is recycled once it has reached the
end of its life cycle, helps to avoid any negative
effects on the environment and encourages
the recycling of the individual materials used
to manufacture the appliance.
To find out more about existing waste collection
centres, please contact the waste collection
service in your local area, or the shop from which
the appliance was originally purchased.
4. The packaging protects the water heater
from any damage which may occur during
transportation. We use materials which have been
specifically selected in order to help protect the
environment. We invite you to take these materials
to the nearest recycling centre or the nearest
recyclable materials collection point.
1.2. Dimensions
See page 2.
➢
All our appliances conform to the EMC Directive
89/336/EEC.
➢
All our boilers are constructed using steel which
conforms to the regulation NF A36-301.
➢
The protective internal coating in our boilers is
made using enamel which has been vitrified at a
high temperature.
1.3. THER armoured range
1.3.a. Definition of the range
Heating element: Immersion heating element
Anti-corrosion protection: Enamelled boiler +
magnesium anode
Pict u re 1- Imm ersion he a ting el ement + magnesi um anod e
1.3.b.T echnical features
See page 6.
1.4. STEA steatite range
1.4.a. Definition of the range
Heating element: Steatite heating element
located inside a bush
Anti-corrosion protection: Enamelled boiler +
magnesium anode
Picture 2- Steatite heating e magnesium anode
1.4.b.T echnical features
See page 6.
A : Magnesium anode / B : Spike / C : Immersion heating element / D : Plate / E : Bush / F : Steatite heating element /
G : PROfessional TECH anode.