Chad Valley 367/8604 Assembly & User Instructions Download Page 3

Blower Safety Information

circle.

Important

Using

Maintenance and storage

Installation

2

Please read before using the air pump and save these instruction for future use.

This product should only be used for inflating the bouncy castle supplied.

Do not use air pump if any part is damaged or missing.

Do not operate the appliance with a damaged cord or plug,

 

or if the appliance malfunctions, or

has been damaged in any manner.  

To reduce the risk of electric shock, connect only to a main electric supply outlet provided with a

residual current device(RCD).

Do not use an extension cord with this air fan.

The appliance must be positioned so that the plug is accessible.

The fan should never be left unattended when in use. The appliance is not to be used by children.

Objects should not be allowed to be sucked into the pump.

To avoid danger of electical shock, do not use the fan in wet conditions.

To reduce the risk of fire or electrical shock, do not expose to water or rain.

If the power supply cord is damaged, it must be replaced by a

qualified electrician.

Under no circumstances should a finger or any sharp object be inserted into the air intake.

Unplug from outlet when not in use and before cleaning or servicing.

The air blower should be used outdoor.

The appliance is not to be used by persons (including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, unless they have been given supervision 

or instruction .

Children must be supervised not to play with the appliance.

The air blower is first to be placed on the ground and then attached in place with plastic anchors

 through the fixing holes.

The air blower should be installed in a well-ventilated location and on a level surface.

Connect plug to AC 220-240V/50Hz socket.

Turn on by pushing “I” firmly. Turn off by pushing “o”.

Always unplug and disconnect the fan from the power supply before servicing or cleaning.

To keep the fan clean, you can use a dry cloth to wipe the surface of the fan.

You should not clean the fan with a chemical solution as this may damage the coating and plastic 

parts.

Never clean the fan in water.

The fan should be stored indoors.

This fan should not be opened or dismantled, as there are no serviceable parts.

 –Please read these instructions fully before assembly or use.

If you need help or have damaged or missing parts, call the Customer Helpline: 

(+44) 0330 0904 420

Produced for Chad Valley Toys, Argos Ltd. 

Address: 489-499 Avebury Boulevard, Central Million Keyness,MK9 2NW.www.argos.co.uk/

chadvalley.

Summary of Contents for 367/8604















Reviews: