PC Troubleshooting
Mac Troubleshooting
The connector does not fit into the USB slot.
- Make sure the connector it not upside down.
- Make sure the connector is in the right slot. USB Ports are usually marked
with a symbol that looks like this:
The CH Eclipse Yoke is not recognized when plugged in.
- Unplug the yoke and plug it back in.
- Plug the yoke into a different USB Port.
- Make sure your USB port is enabled in your system's BIOS and that you are
running Windows 98 or later.
- Make sure you are running Direct X 7.0a or later.
- Check that your USB ports are installed and recognized by Windows in the
Device Manager. If they are not, contact your computer manufacturer.
The Yoke will not calibrate properly.
- Download and install the CH Control Manager from www.chproducts.com
and use the built in device calibrator. You will know that the yoke is properly
calibrated when you test it in Windows Gaming Options. There should be a box
with a cross hair in the center and a four red bars to the right of the box for the
lever axes.
9. In the Game Controllers window, in the list of controllers, you should see
“CH Eclipse Yoke” with a status of “OK”.
10. Click on the name of the CH Eclipse Yoke in the list, if it is not already
highlighted, and then click the Properties button.
11. A test window will appear. You can move the handles, levers, and paddles
and toggle the buttons to see if the CH Eclipse Yoke is properly installed. Move
the yoke handles, paddles, and levers to check for full range of movement.
12. Your CH Eclipse Yoke is now successfully installed.
- Go to www.chproducts.com for Macintosh requirements and troubleshooting.
- 3 -
