D1 SACD/CD unit remote control
(1) Remote control activity LED
(2) Mute/Standby (long push) button
(3) Play/Pause / Phase polarity inversion (long push) button
(4) Skip/Search Forward button
(5) Skip/Search Backward button
(6) Stop/Eject button
The remote control activity LED is illuminated while a button is pushed on the remote. The remote control's buttons support dual
functions by distinguishing Normal Push [NP] and Long Push [LP]. For a Normal Push [NP], the button is released immediately
after pressing. A Long Push [NP] requires the button to be pressed for at least 2s before being released.
Remote control functions are according to the following table:
Remote Control Button
Normal Push [NP]
Long Push [LP]
MUTE
Mute/Unmute (also wakes-up from STANDY) Sets unit into STANDBY or wakes it up
PLAY (
0
)
Play/Pause
Phase polarity inversion
SKIP FORWARD (
4
)
Skip to next track
Search forward
SKIP BACKWARD (
3
)
Skip to previous track
Search backward
STOP (
2
)
Stop (also closes drawer if required)
Open the drawer
Remote control functions
4.4.2 Changing the remote control batteries
If the LED does not turn on when pressing a button of the remote, it is likely that the remote batteries need to be changed. To
replace the batteries, remove the back cover of the remote control by removing the screws (M2.5 cross-shaped type, make sure to
use appropriate screwdriver). Exchange the batteries for new ones (make sure to respect batteries polarity) and put the back cover
back in place and tighten the screws. 2 AAA batteries are required.
40
D1 User Manual
Rev 3.0
(2)
(3)
(4)
(5)
(6)
(1)
