Shaft covers (left: stacking cover, right: top cover)
3.3 Connections
This section provides information about how to connect your D1 SACD/CD unit to your system. As the D1 is a modular design with
different optional boards, the description applies to the example configuration presented below. If your options do not match the
example or you don't feel secure with the connections to be applied to your configuration, please contact your authorized dealer
for assistance.
The example configuration is a full featured multi-channel configuration with 3x DIGITAL_OUT boards (L/R, Ls/Rs, C/Sub), 1x
ANALOG_OUT (L/R) board and clock synchronization option (SYNC_IO board). This is one of the most complete configurations of
D1. If your configuration does not include some of the presented options, just discard the corresponding connections.
Rear panel connections
(1) Ethernet port for command interface. Unused for now. [CONTROL board]
(2) BNC clock input. Provides 75 Ohm or Hi-Z input. [optional SNYC_IO board]
(3) TOSLINK (S/PDIF) digital output for L/R channels [DIGITAL_OUT board for L/R channels]
(4) AES-EBU digital output for L/R channels [DIGITAL_OUT board for L/R channels]
(5) TOSLINK (S/PDIF) digital output for Ls/Rs channels. [optional DIGITAL_OUT board for Ls/Rs channels]
(6) AES-EBU digital output for Ls/Rs channels. [optional DIGITAL_OUT board for Ls/Rs channels]
(7) TOSLINK (S/PDIF) digital output for C/Sub channels. [optional DIGITAL_OUT board for C/Sub channels]
(8) AES-EBU digital output for C/Sub channels. [optional DIGITAL_OUT board for C/Sub channels]
Rev 3.0
D1 User Manual
17
(1)
(2) (3) (4)
(5) (6)
(7) (8)
(9)
(10)
(12)
(13)
(14) (15) (16) (17) (18) (19) (20) (21) (22)
(23)
(24)
(27)
(28)
(11)
(25) (26)
