9
7.1 Channel setting
For tracker status monitoring and working with external devices it is necessary to set up the data
channels. It can be done in “Channels” tab in configurator.
Pic.4.Channel setting in cGuard Configurator
Configurator shows the channel data values in real time, allows turning on/off data sending from
each channel and setting the sending conditions. The list of available channels of cGuard Litom
is shown in the table 2. The correspondence between channels and inputs can be seen in table 3.
It is important to turn on the data sending of a channel with data from external sensor
after connecting the sensor to tracker (channel choosing depends on input connected
with sensor, and on sensor purpose).
To allow the data sending for the channel, go to “Channels” tab in configurator, then select the
needed channel in the channel list, get sure that the name of this channel is shown at the right
side (“Per-channel settings”) and set at least one of the sending conditions.
