Compliance
Group 1
Class B
Not applicable
Not applicable
Electromagnetic environment – guidance
The TMB-1018 uses RF energy only for its
internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
The TMB-1018 is suitable for use in all
establishments other than domestic and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
Table 2 Guidance and manufacture’s declaration – electromagnetic immunity –
for all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacture’s declaration – electromagnetic immunity
The TMB-1018 is intended for use in the electromagnetic environment specified
below. The customer or the user of TMB-1018 should assure that it is used in such
an environment.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Surge IEC
61000-4-5
Voltage dips,
short
interruptions and
voltage variations
on power supply
input lines IEC
61000-4-11
Power frequency
(50Hz) magnetic
field IEC
61000-4-8
IEC 60601 test level
±6 kV contact
±8 kV air
±2 kV for
power supply lines
±1 kV line(s)
to line(s)
<5% UT
(>95% dip in UT)
for 0.5 cycle
