CGOLDENWALL B00JMEBB2Q, Manual

Page: 15 / 24

14
6. For
Grinding Super-hard Materials (such as pearls, tortoise
shells, Tianqi, Panax notoginseng, etc.)
It is recommended to crush the materials into small pieces before putting
into the machine for grinding. And during grinding, pause about 10
seconds after every 1 minute working. The grinding job can be completed
in 2-3 minutes.
7. For Grinding Fibrous Materials (such as Dendrobium
，
Ganoderma lucidum, etc.)
Because this type of material itself has a fibrous structure, it cannot be
ground into powder state, and usually it will be ground into floc.
It is recommended to use interval grinding method.
Note: Different materials have different properties, and the required
grinding time is different, which needs to be adjusted in actual operation.