CAMTECH/97/E/TM/3.0
TM Maintenance Handbook January’97
22
1.
Set hooks 1 on inner bearing stopper.
2.
Fix hooks 1 by keeper plate 2
3.
Screw double-end studs 4 in hooks 1
4.
Set support disk 5 on Ram, set nut 3 on piston.
5.
Fix support disk 5 by double-end studs 4 & nuts 6
6.
Press piston with handling oil power pump.
1 - NUT, 2 - PULLER, 3 - ABSORBER, 4 - DISTANCE PIECE
5 - SUPPORT DISK, 6 - STAND, 7 - RAM WITH OIL POWER PUMP
TOOLS ASSEMBLING PROCEDURE :
1.
Set Ram into stand 6
2.
Screw support disk 5 on Ram.
3.
Put absorber 3 & distance piece 4 on support disk 5
4.
Set puller 2 on outer race.
5.
Put together outer race & puller 2 on distance piece
6.
Press piston up through puter race & set nut 1 on piston.
7.
Catch rollers by puller 2
8.
Press piston downward with handling oil power pump.
Figure 2.5
