Modular
4. Settings
Pickup
There is a pickup and double-sided adhesive tape included to the Peak+Hold module package by
standard, so it is easy to connect the P+H to any percussive instrument. The pickup is equipped with
1/4' jack and 2m cable.
Suggestions:
on tabletop
wooden board
bongo drum
cymbal
Recommended filter settings for different instrument inputs (Knob )
Attaching the Pickup
Cut off a piece of ca
2,5x2,5 cm² from the tape
Pull off the paper from one
side
Fix it on the metallic side
of the pickup
Cut off the overhanging
edges
Pull off the second paper
Fix it on the instrument
Note:
The pickup cable is very microphonic; to avoid unwanted triggers it should be fastened, e.g.
on the drum stand.
Frequency-selective mode
It is possible to limit the audio signal's frequency range for the
further internal processing. This allows advanced settings especially
when working with two P+H modules. As well as this, unwanted noise
may be minimized by reducing very low or very high frequencies.
There are two trimmers
2
3
4
5 6
7
8 9
21
10
11
13 14
15 16
17
18 19
20
22
12
Objekt in Pfade:
4
4
14
Falsche Zahlen
4
and
2
3
4
5 6
7
8 9
21
10
11
13 14
15 16
17
18 19
20
22
12
Objekt in Pfade:
4
4
14
Falsche Zahlen
4
on the backsided PCB (nearby the
power supply connector) creating a simple adjustable highpass-lowpass filter combination.
Note: There
is no ability to listen directly to the filtered audio signal; it only affects the processed CV outputs. The
Audio Out always provides the full-frequency range signal. Please also read chapter
5.Adjustments
for more information.
5
Filter
2
3
4
5
6
1
7
8
9
Filter
2
3
4
5
6
1
7
8
9
Filter
2
3
4
5
6
1
7
8
9
Filter
2
3
4
5
6
1
7
8
9
Highpass
Lowpass
