HARDWARE:
Snap
Bushing
M6x15mm
Bolt
M6x40mm Bolt
M6 Nut
B
B
F
B
B
B
B
C
C
D
C
D
F
54
51
Figure C
Figure D
Front
Front
Back
Step 9
Step 9
Figure C:
Step 8:
Step 9:
Step 10:
Step 11:
Step 12:
Attach the back panel (54) to
the back of the cart assembly as
shown. Use two M6x15mm bolts (B)
to secure the top, and two M6x40mm
bolts (C) to secure the bottom as
shown. Thread M6 nuts (D) to the
lower bolts. Loosely tighten the bolts.
Insert M6x15mm bolts (B)
into the side panel holes as shown.
Loosely tighten the bolts.
Insert the snap bushing (F)
into the access hole of the back panel
(54).
Attach the front cross bar
(51) to the front of the assembly as
shown. Use six M6 bolts (B) to secure
the front cross bar. Insert and loosely
tighten all bolts first.
Once all bolts are in place,
securely tighten ALL bolts from all
previous steps.
Figure D:
B
11
