CFM CX3000GS, Installation And Maintenance Instructions Manual

Page: 4 / 15

Tr a n s ition Tr a n s ition
Ret u rn Air D u ct Cle a n Air O u t
CX 3 000G S
#10 S crew s Not
Longer Th a n 1/2 in.
20 Degree Exp a n s ion Per S ide
(4 in. Per Line a r Foot)
F Fiig g.. 4 4
3 10
Filter Side Catalyst side
T TR RA AN NS SIIT TIIO ON NS S F FO OR R IIN N--D DU UC CT T M MO OU UN NT TIIN NG G
F Fiig g.. 1 1
The C CX X3 30 00 00 0G GS S D Du uc ctte ed d A Aiirr P Pu urriiffiie err has a built-in computer to automatically keep
track of service intervals. LED service lights change color, 30 days in advance of
required service, to indicate when the MERV-11 electrostatic filter or ultraviolet
UVC lamps need replacement.
• MERV-11 Electrostatic Filter
o
Replace every 6 months
o LED service light turns from green to yellow after 5 months, and to
red after 6 months
• Ultraviolet UVC Lamps
o
Replace every 12 months
o LED service light turns from green to yellow after 11 months, and to
red after 12 months
R RE EP PL LA AC CIIN NG G L LA AM MP PS S
1. Unplug the power cord from the C CX X3 30 00 00 0G GS S unit.
2. Unscrew the two locking knobs and remove the door. (Fig. 6)
3. Remove photo-catalytic module. (Fig. 3)
4. Unplug UVC lamps. (Fig. 4)
5. Loosen retaining knobs and remove old UVC lamps. (Fig. 5)
6. Install new UVC lamps, tightening only finger tight.
7. Tighten retaining knobs and reconnect plug ends.
8. Re-install photo-catalytic module and filter. Ensure that filter and photo-cat-
alytic module are installed in proper airflow sequence.
9. Secure door.
10. Reconnect power cord.
11. Check both sight ports to ensure that both lamps are illuminated.
F Fiig g.. 3 3 F Fiig g.. 5 5
IIN NS ST TA AL LL LA AT TIIO ON N IIN NS ST TR RU UC CT TIIO ON NS S
A AIIR RF FL LO OW W
Airflow
F Fiig g.. 2 2
M MA AIIN NT TE EN NA AN NC CE E
S SE ER RV VIIC CE E IIN NT TE ER RV VA AL LS S