G/01141C
Edition 1
27/04/2012
MD-4931CFA Handbook
__________________________________________________________________________________________________
Operator Handbook for CFA Door Phone G/01141C Issue 1 Page
7
3. USER INSTRUCTIONS
3.1
To Store the Telephone Number to be dialed
1.
Set the ‘AUTO-ANSWER’ jumper in the unit to ON. (This is the factory default setting).
2.
Dial up the Door Phone from an independent telephone
3.
Wait for it to answer with a double ‘pip’ tone.
3.
Press *.
4.
Enter your PIN (normally none).
5.
Press 2.
6.
Enter the required telephone number.
7.
Press # to store the number.
Notes:
1.
A dialing pause can be entered by pressing * #.
2.
A star (*) can be entered by pressing * *.
3.
A hash (#) can be entered by pressing # #.
4.
If no number is entered, the MD-4931CFA will ‘hotline’ when the push button is pressed.
Summary: <* [PIN] 2 nnn…#>
3.2
How to make a call from the CFA Door Phone
1.
Simply press the ‘CALL’ button for about half a second or more.
2.
Listen for the dialing sound followed by ringing tone.
3.
Talk as required.
Note: Pressing the push button during a call will re-establish the call. This is a fabulous feature
designed to overcome the possibility of the system ever locking up the line.
3.3
How to call the CFA Door Phone
1.
Set the ‘AUTO-ANSWER’ jumper in the unit to ON. (This is the factory default setting).
2.
Dial up the Door Phone from an independent telephone and wait for it to answer with a
double pip tone.
3.
Talk as required.
4.
Hang up when finished.
3.4
How to Open the Door
1.
While talking to the door phone party, simply press *
2.
Enter your PIN (normally none).
3.
Press 5 and listen for the confirmation tone.
The output relay will then stay activated for 10 seconds, allowing the calling party to enter.
Note that for your security this will only work from the remote telephone, the person standing
outside cannot do it.
Summary: <* [PIN] 5 “beep”>
