7.11 Engine cooling system operation and maintenance instruction
[
Cooling system
]
Radiator is located in front of engine. Clean the dust and dirt on the radiator fins regularly according to
the road conditions.
Coolant type
Use only high-quality ethylene glycol based antifreeze with corrosion inhibitors, which is specifically
designed for aluminum engines. The coolant is a blend with 50% antifreeze and 50% distilled water
premixed at the factory.
NOTE
：
1. Coolant cannot be replaced with tap water and other liquids, otherwise it may cause engine damage.
2. Always purchase coolant from CFMOTO service station.
Inspect the coolant level
：
1. Place the motorcycle with main stand on a flat surface.
2
. Inspect the coolant level when the engine is cold.
3
.The coolant should be between the upper and lower marks.
Adding a small amount of coolant
Adding procedure
：
If the coolant is at or below the lower line
④
, add coolant
up to the upper line
③
in time.
1. Place the motorcycle on a level surface with the main stand (optional).
2
. Open the reservoir cap
②
add the coolant to upper line
③
.
3
. Close the reservoir cap
②
after finish adding the coolant.
Pic
26
Cooling system
①
Reservoir
·
②
Reservoir cap
·
③
Upper line
·
④
L ower line
·
⑤
F an
·
⑥
Radiator
⑦
Radiator cap
-
5
7
-